In this article, we shall tell you about how to cut a glass bottle. Also, we shall give you some necessary tricks for the cutting down of the glass bottles.
In this diverse world, where the technology is at its peak, it also discovers the method of cutting the glass bottles. We shall also provide the necessary materials needed for the cutting down of the glass bottle.
Further details are available at how to upcycle glass bottles which could help you in cutting down of the glass bottles.
The world we are living in is the advanced world, advanced people always want to see perfection in their work. Sometimes, we need to cut the bottle that may be for many reasons like we want to keep it as a decoration piece or we want to use it for another purpose.
As we know, the glass bottle cannot be cut down with the knife or other tools easily. Also, it needs a technique whiling cutting it with proper tools. Glass bottle can be used for multi purposes and the testimony of this statement can be widely seen in this diverse world.
Furthermore, we use different techniques to cut the glass bottle in a colorful manner. Glass is very sensitive to the damage and sometimes when it is hit improperly it may be beak out into multiple pieces. Therefore, it is necessary to cut the glass bottle with proper technique and with proper understandings.
Now we shall proceed towards some of the techniques, through which glass bottles can be cut with ease and comfort. We shall discuss some of the methods through which glass bottles can be cut.
Cutting of Glass Bottle with Flame
It is one of the techniques used to cut the glass bottle more effectively. We need sometimes cut the glass bottle for our use so, in this regard, we cut the glass bottle so, that we can use it for other purposes.
In this method, we follow some steps and follow some rules. In this technique, we use the flame as the main component. Let’s go and check how it works.
Step 1- Use the Cutter
In this step, we use the cutter for cutting the glass bottle. We mark the cutting line with the scratching of the glass bottle and repeat it again and time again. When the cutter leaves the mark on the glass bottle so just move towards another step.
Cutter will mark the area through which the bottle has to be cut down. The line that is marked up on the glass bottle will be broken. Now turn towards the next step.
Step 2- Heat Up the Bottle with Flame
Now after marking the area over the glass bottle now you just need to put that particular area over the flame so the market line should be mild and mild. When it will be mild so it will be easy to cut on the same plane.
Rotate the bottle over the flame for about five minutes to thoroughly absorbs the heat. Now make sure that you have well rotated the bottle over the flame for about five minutes.
Step 3- Dip the flamed glass bottle in cold water
Right after flaming the glass bottle now dip the glass bottle in the cold water. Cold water will help in the breaking of the glass bottle because when a mild hot glass bottle is a dip in the water it breaks it.
Step 4- Again heat up the Bottle on the flame
After dipping the glass bottle in the cold water now again heat it up on the flame for about five minutes and wait for its better results. Now the bottle is ready to break in the cold water you just need is to put it in the cold water for some time and you are done with it.
Step 5- Again dip the flamed glass bottle in the cold Water
This time when you will dip the glass bottle in the cold water it will break at the same point where lines were made. Now you are done. Just clean out the bottle and just rub the edges with sandpaper and use it as per your need and desire.
Cutting off the water bottle with hot water
It is also one of the working techniques used for cutting out the water bottle. Let’s see how it will work.
Follow the following steps and you will be able to cut down the glass bottle at the right plane.
Step 1- Use cutter
In the first step you have to use the cutter for marking the area where you want to cut it. Just drag the cutter on the glass bottle time and again. Now move toward another step.
Step 2- Boil the water
Take some water and boil it in a container. Now put the hot water over the glass bottle. Now move to the next step.
Step 3- Now pour Coldwater
You just need to continue pouring hot and cold water over it until the breaking edges won’t appear. Now again put the hot water over it and then pour some cold water over it and you are done with it.
Step 4- Rub the edges with sandpaper
Now the final step is to rub the edges of the glass bottle with the sandpaper so that it can be used for a person daily life use.
Use of Dremel to cut the glass bottle
Dremel is an electric device that is used to cut the glass. Let’s move towards the working order.
Step 1- Masking tape
Just wrap up the bottle with masking tapes and mark the cutting line in it by adding masking tape on both sides.
Step 2- use the Dremel
Now when you are done with the masking tape now you just have to cut the line with the Dremel so gain the desired results.
Step 3- cut edges with sandpaper
Now just rub edges with sandpaper and start using it.