All stylish antique furniture is appreciated by everybody but if you don’t maintain antique furniture properly then it can have an impact on the life of the furniture. The unique antique furniture is costly as well as stylish. You might have spent lots of money in customizing it or in buying the same but if the look of the antique furniture starts diminishing, it will start to appear old. Then you need to refinish that antique furniture. This is the best possible way to make your furniture look like as good as new again.
Here Are Some Tips for Antique Furniture Restoration
While it is not easy to restore your antique furniture, but with these antique furniture restoration tips you will save your money as well as make your antique piece to look like new again.
#1. Read the Instruction on Each product
Whatever type of finish, you use on the furniture, for antique furniture restoration you should always read the instruction written on the bottle or finish packet and then start applying the same as per the given instructions.
If you use the fumes at the place which is not ventilated, then it may affect your health so keep it in mind that before using finishes fumes to restore antique furniture you must keep a check on the ventilation part.
#2. You Have to Decide Whether the Antique Furniture Require A Wash or Strip
You have to make sure that whether you have to strip the upper layer of the furniture or the antique furniture, it only needs to be cleaned up in order to antique furniture restoration. In order to assess whether the antique piece requires the removal of old strips or only the paint, first, you have to clean all the sides of the antique furniture with the help of cleaner using a brush. Then you will be able to get a better idea whether it needs to be painted or only a little cleaning with a piece of cloth can make it appear as new.
If the surfaces are smooth while the polish of the antique material has become dull then it is a good idea to just repaint the walls of the piece; else if the sides seem uneven then it is better to remove strips and use any plywood and then polish it in order to achieve antique furniture restoration.
#3. Use Strip Remover to Remove the Strips
You have to remove the strips of the antique piece if the outer surface is not smooth and has become uneven. Use the strip remover to strip the layer. Use a huge amount of remover in just one stroke and this will strip the layer like a pudding. Don’t use your finger or any body part to remove the remover. You can remove with the help of any sharp material such as a knife. Don’t touch it with naked skin as it may create problems to your skin.
Note: Wear mask and hand gloves while applying strip remover on the walls of the antique piece.
#4. Use Cleaner to Wash Down the Residue
Use an appropriate cleaner to remove the residue and then wash it properly and keep all the rags and residues in an airtight container.
#5. Final Finishing
Now it is the time for the final finishing of the antique piece in order to achieve the antique furniture restoration. First, apply the finishes on the walls of the antique furniture and then keep it for twenty-four hours and let it dry.
There is no compulsion that you have to apply just one coat on the antique furniture. You may also apply another coat after 24 hours when the first coat gets dry.
This is how you will be able to achieve the perfect antique furniture with the help of antique furniture restoration.
