Granite and Marble Countertops Sealing Instructions

Granite and Marble Countertops Sealing Instructions

Meta Description: Granite and marble countertops should be sealed by a quality countertops sealer that makes the surface waterproof and stains and mold resistant.

Stains, scratches and dullness are often seen on granite and marble countertops after a few years. The reason for these natural stone countertops to lose their sheen and beauty is the porosity of these surfaces. If you have not sealed your granite and marble countertops, they tend to absorb all kinds of liquid spills, which eventually lead to staining and mold development. These problems can be avoided by sealing these surfaces with a good quality countertop sealer. In this article, we shall guide you how to use a countertops sealer.

 

But, before we proceed to how to seal, let us understand in depth, why we must seal.

 

Why should you Seal your Granite and Marble Countertops?

    Both granite and marble are porous. They tend to absorb water and moisture, thereby leading to mold and mildew growth.
  • These stones’ segments chip off when they come in contact with a heavy item.
  • If you have installed granite or marble for your kitchen countertops, these may get scratched easily due to cutting and chopping of fruits and vegetables.
  • Granite or marble tile used in kitchen countertops are more susceptible to oil leaks and hence develop more intense and deep-rooted stains and grime.
  •  

To prevent these occurrences, you must seal your countertops using a good quality countertops sealer. A good quality or heavy-duty sealer makes the surface waterproof.It drenches into the tile/grout surface and not closes the pores from the inside, consequently forestalling further dampness retention. A sealer also ensures that the surface becomes easier to clean and maintain.

When should you Seal your Natural Stone?

If you want to retain the sheen and brilliance of your granite or marble tile, then it is best to seal it at the time of installation. In the event that you have not fixed it at the hour of establishment, you can seal it whenever later by first cleaning the tile altogether utilizing a tile floor more clean. Once the sealer is applied, the surface will have water droplets appearing to be like beads. If water droplets tend to soak inside, then it is an indication that your tile needs sealing. It could also mean that the existing sealant has worn off and you need to apply a new layer. Resealing is necessary, as avoiding that will lead to staining on the tile again.

 

How to Seal your Granite or Marble Countertops?

 

Once you have determined if the tile/grout needs to be sealed, you need to buy a good quality sealer to give you best results. Celine – a quality sealer from pFOkUS not only enhances the look of the tile, but also imparts a luxurious sheen to it.

 

Celine is a clear topical solvent-based epoxy grout sealer that creates a waterproof layer on the surface, makit it resistant to water or stains absorption. It imparts a natural appearance owing to its sleek look and does not look bulky. Celine forms a protective barrier on your granite and marble countertops and hence prevents any kind of stains from settling on the surface.

Here is How  you can Seal your Granite or Marble Countertops with Celine:

  • Once the surface is thoroughly cleaned, wipe it with a soft cloth to ensure that it is completely dry. After that, you need to let the surface dry completely.
  • After that, you need to follow up with an even application of Celine on the surface. It is best spread evenly with the applicator tool provided along with it. The first coat will dry to a semi-gloss finish.
  • It is best to let Celine dry for 48 hours before you expose it to normal wear and tear.
  • A small water test is recommended after the first 48 hours to check whether it has dried completely or not. You will see that the water will stay like beads on a superficial level not at all like before utilization of this regular stone sealer – Celine, when the water used to get ingested rapidly.
  • Following 48 hours, you need to apply the subsequent coat. The next coat will dry quickly to give you a dazzling sheen on your surface.

Leave a Reply

Your email address will not be published. Required fields are marked *